How about the Fujibao air-conditioning fan?

Spring blossoms, everything recovers, and when all the vitality regenerates, some "little things" in the family are also waiting to multiply. They are mites.

So where are the mites?


They are on the clothes you have not washed yet. If you happen to put this clothes together with other clothes, they will be on your other clothes. They are also in the towels hanging in your bathroom, in the pillows and quilts where you sleep, on the mattresses on the beds. The worst part is that they may be in an air conditioner that you haven't cleaned in a long time, and they float to any corner as soon as the air conditioner is turned on.

In fact, although mites are very abominable, they are not so stubborn, mainly because the work of removing mites is meticulous, because their reproductive ability is very strong, today I will share with you some methods of daily mite removal.


1. Clothes mite removal


In fact, after the clothes are washed and dried, the mites can be removed, just to prevent the mites from regenerating, you can add a few drops of toilet water when washing, so that the mites do not like to breed.


2. To remove mites from towels and bath towels


Mites love to breed in humid environments. Towels and bath towels must be taken to the balcony to dry after use, because mites are afraid of high temperatures. There is also a small appliance that can effectively remove mites, that is, a hair dryer. Use the hair dryer to adjust to the hottest air and blow all the towels and towels, and the mites are basically killed.


3. Bed mite removal


The best way to remove mites from quilts is to dry them. In the good weather when the sun is empty, take the quilt pillows out to dry. After a period of time, knock on the quilt, change the face and then dry, and insist that the quilt must be free of mites and will smell of sunlight.

4. Mattress removal


The mattress is too large to be taken outside to dry. Here is a small trick shared by netizens, that is, first blow the entire mattress with the hot air of the hair dryer to kill most mites, and then use safflower oil, toilet water and alcohol Sterilize the liquid according to the ratio of 1: 1: 50, spray it on the surface of the mattress with a watering can, and clean it once every two months to effectively remove mites.


5. Air conditioner removal


Why should the air conditioner be put at the end? Because if there are mites in the air conditioner, as long as the mites are used, they will float to any place in the home, and the previous work is in vain. Therefore, cleaning the air conditioner is the top priority. We can remove the filter of the air conditioner and rinse it with water flow. If the water flow of the tap is not clean, you can use the bathroom shower to adjust it to a concentrated water flow. clean. Then spray a little toilet water, dry it in a dark place and install it back.

However, there is no way to clean the air conditioner heat exchanger by yourself, you need to find professional personnel to clean it.


It is not difficult to remove mites, but you need to be careful and persevere. If you feel that you are not capable of doing it yourself, or if you are too busy to work, you can ask a professional cleaning team to remove mites. Professional equipment can be used to remove mites Mites can also prevent mite regeneration.

Gas Fastening System is a very popular and very efficient building Fastening System which include gas tool, fuel cell and strip fasteners. Gas tool absorbs flammable gas from fuel cell and mixes it in its air cylinder. The mixture is  ignited by electric device and produce a lot of high pressure gas which push the piston go forward to push the strip fastener into the concrete or wood basement. Compared with General Purpose Powder Actuated Fastening System, it is much more quicker and efficient. But it is not used for very hard basement for its highest power energy is no more than 110 Joules.

Gas tool:

gas nailer

Fuel Cell:

Gas Fuel Cell

Strip Fasteners:

gas nails

The packages are as the following: 

1.Gas tool and its spare parts will be packed by a plastic box with a carton;

2.10 Fuel Cells are packed by 1paper box, 12 boxes are packed by one carton.

3. 1000 strip fasteners are packed by 1 paper box, 5 or ten 10 paper boxes are packed by one carton.



Gas Fastening System

Gas Fastening System,Gas Nail,Gas Actuated Tool,Gas Fastening

Yibin Heheng Technology Co.,Ltd , https://www.chinadirectfastening.com